When checking your test leads, the resistance measurement should be:

Unlock all questions

This demo includes only 20 questions. Upgrade to access hundreds of questions, flashcards, exam simulations, and disable ads.

Full question bankExam simulationsFlashcards
From $25.99Unlock all

Study for the Gate 3 Airstreams Renewable Test. Explore multiple choice questions and detailed explanations. Prepare efficiently for your evaluation!

Multiple Choice

When checking your test leads, the resistance measurement should be:

Explanation:
A near-zero resistance in your test leads is what you’re after. The leads should conduct with almost no resistance so they don’t skew the measurement you’re making in the circuit. When you check them, you’ll typically test by shorting the two probes together; a healthy set of leads should read less than 1.0 ohm. If the reading is higher, there may be a damaged conductor, a loose or corroded contact, or degraded insulation causing extra resistance, and you should replace or repair the leads. Values well above this indicate the leads aren’t suitable for accurate measurements.

A near-zero resistance in your test leads is what you’re after. The leads should conduct with almost no resistance so they don’t skew the measurement you’re making in the circuit. When you check them, you’ll typically test by shorting the two probes together; a healthy set of leads should read less than 1.0 ohm. If the reading is higher, there may be a damaged conductor, a loose or corroded contact, or degraded insulation causing extra resistance, and you should replace or repair the leads. Values well above this indicate the leads aren’t suitable for accurate measurements.

More Multiple Choice Questions
Subscribe

Get the latest from Passetra

You can unsubscribe at any time. Read our privacy policy